Vehicle Windows, Vehicle Body Surfaces, Motorcycles, Mopeds, Bicycles, Helmets, Tractors, Trailers, Toolboxes, ATV’s, Jet Skis, Surfboards, Snowmobiles, Snowboards, Skateboards, Drums, Guitars, Mirrors, Laptop Cases, Desktop Computer Towers, Boats, Hard Hats, Walls, Smooth Painted Surfaces, Store Windows, Plastic Boxes, Printers, Lockers, Doors, Laminate Surfaces or just about any surface that is smooth and clean!
Made from high quality Oracal 651 glossy vinyl. It’s Waterproof and UV resistant. Easily applied to any smooth surface. 7 years outdoor, all-weather resistent. Don’t fall prey to cheap vinyl material from the other guys. If they don’t tell you what vinyl material they’re using, chances are it’s the low grade vinyl and you will have problems with fading and cracking.
Step 1: The surface temperature should be about room temperature or cool to the touch. Do not apply decal to a hot or extremely cold surface. Application surface MUST BE completely clean and free of any dust, oils, wax or other debris. If you are using Windex or another ammonia-based cleaner to clean the surface, dry the area completely before applying the decal. The ammonia interferes with the adhesive. Any surface contamination such as bad bodywork, rust, dust or other debris will show through and spoil your final result.
Step 2: Place sticker face down on a flat surface. Carefully peel off white backing paper away from the clear application tape making sure that all of the sticker remains on the clear application tape.
Step 3: Carefully peel back clear sheet making sure the sticker remains on the desired location & give it another rub to adhere to surface.
Step 4: Pop all bubbles with a pin.